Compostable Plastics S1-01

• Material: Polyethylene/PE
• Usage: General Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Film Pressure
• Color: White
• Melt Flow Rate: 2.0~6.0
• Model NO.: S1-01
• Melt Point: 110~130
• Specific Gravity: 1.25~1.30
• Tensile Strength MD/Td: 15/10
• Product Name: Compostable Plastics S1-01
• Transport Package: Well Packaged Products Can Be Used Directly
• Specification: Biodegradable Plastics S1-02
• Trademark: SWE
• Origin: China
• Production Capacity: 20mt/Year

Product Description

Compostable Plastics S1-01

 

Production Description

Features	Application
Totally biodegradable	Blowing film
Home compostable	Bags
Food contact

 

Typical Properties

Properties^[1]	Test Method	Test Condition	S.I.Units	Values^[2]
Material
Melt Flow Rate	ISO1133	190ºC,2.16kg	g/10min	2.0~6.0
Specific Gravity	ISO1183	23ºC	g/cm3	1.25~1.30
Melt Point	DSC	-	ºC	110~130
Film                                                        Thickness 15μm
Tensile strength MD/TD	ISO527	25ºC	Mpa	15/10
Elongation at Break MD/TD	ISO527	25ºC	%	250/350
Tear Strength MD/TD	ISO6383-2	25ºC	mN	1000/2000
Dart Drop	ISO7765-1	25ºC	g	130

 

[1] Not to be construe as specifications

[2] The listed values are measured by test specification and used for referential purpose only.

 

Quality Control

The melt flow rate, MFR, at 190, 2.16Kg, according to ISO1133 has been defined as specified parameter for quality control. A certificate can be provided with each lot number upon request. In order to obtain a high accuracy for the MFR measurement, the granules should be dried for 4 hours at 80ºC.Other data given in our literature are typical values, which are not part of our product specification

 

Storage

Temperatures during transportation and storage may not exceed 70ºC  at any time. Storage time in an unopened bag may not surpass 12 month at room temperature (23ºC).   

 

Form Supplied

Grade name	Form Supplied
S1-01 S20	25kgs/package
S1-01 S20L	900kgs/Octabin

 

Processing Conditions for Blowing Film

Setting		Start Point	Range
Melt Temp.		120ºC	115-125ºC
Barrel Zone Temp.	Rear	125ºC	120-130ºC
	Center	125ºC	120-130ºC
	Front	120ºC	115-115ºC
Die Head Temp.		125ºC	120-130ºC
Processing Temp. Limit		180ºC
Pre-Dry Requirements		80ºC, 4h

 

Well packaged products can be used directly. If package is damaged before use, the product should be dried prior to processing. Moisture levels above 1000 ppm may impair film-blowing operation. Effective drying takes place at 80°C for 4 hours. The dried product should keep away from moisture. The data sheet is just for reference. In actual process, the parameter should be adjusted.
 

Frequently Asked Questions

Q1: May I get one sample before placing order?
Re: Yes, Sample are available. For normal products, samples are for free and you just need to bear the freight; 
For those high value products, you just need to freight and certain product cost. When we both cooperate for 
some times or when you are our VIP customer, free sample will be offered when you need.

Q2: Which payment is available for your company?
Re: T/T, L/C. You can choose the one which is convenient for you. 

Q3: How and when can I get my goods after payment?
Re: For small quantity products, they will be delivered to you by international courier(DHL, FedEx, TNT etc.) 
or by air. Usually it will cost 3-5days that you can get the goods after delivery.For large quantity products,
shipping by see is worthwhile.It will cost days to weeks to come to your destination port, which depends on 
where the port is.

Q4: Is there any possible to use my appointed label or package?
Re: Yes. If needed, we'd like to use label or package according to your requirement. 

Q5: How can you guarantee the goods you offer is qualified? 
Re: We always believe honesty and responsibility are basis of one company, so whatever products we provide 
for you all are qualified. We will have goods tested and provide COA before delivery for sure.