Fast Delivery 45% Polymer Polyol Pop 2045 for Conventional Slabstock Foams

• CAS No.: 9082-00-2
• Formula: CH2-Chcl-]N
• EINECS: 208-750-2
• Molecular Principal Chain: Carbon Chain Polymer
• Color: White
• Model: Sw-36/28g
• Transport Package: Iron Drum
• Specification: 99% min
• Trademark: SWC
• Origin: China
• Production Capacity: 100000

Product Description

Product Name: Polymer Polyol
Type: 2045

Introduction
Polyol 2045 is a copolymer polyol especially designed for the production of flexible slabstock foam. It can be used in blend with conventional polyether polyol for the production of enhanced and high load bearing foam. The foam produced with such blends shows
a hardness increase proportional to the level of CPP added.

Specification

Property	Value	Unit of measurement	Method	Acid, mgKOH/g	PH	Color, APHA	Na/K content, mg/kg	Functionality	Molecular weight
Hydroxyl number	28.0-32.0	mg KOH/g	GB/T12008.3-2009	≤0.05	5.0-7.0	≤15	≤3	3	6000
Moisture	<=0.08	% by wt.	GB/T22313-2008	≤0.05	5.0-7.0	≤15	≤3	3	4800
Viscosity 25ºC	3000-4000	mPa.s	GB/T12008.7-2010	≤0.05	5.0-7.0	≤15	≤3	2	4000
Solid content	43-47	% by wt.	Q/0322SLH004-2019
Appearance	White to off-white	----------------	Visual
Styrene	≤10	PPM	GB/T31062-2014

Application
Polymer Polyol is an inactive polymer polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx45% by weight. It effectively combines a high solid content with low viscosity.
Polymer Polyol can also be used for the production of conventional slabstock foams with very high load bearing properties.
Handling Precautions
Flash point is above 200ºC (open cup method), flammable but non-explosive. In case of fire, put out with foams, dry powder, steam or water.
When handling polyols, avoid exposure to eyes or prolong contact with the skin. If eye contact occurs, flush with plenty of water.If skin contact occurs, wash exposed areas thoroughly with soap and water.

Storage
Recommended storage temperature (ºC):10-35
Shelf life (ex-works) 12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product. Recommended temperature for
processing (ºC):20-25.

Frequently Asked Questions

Q1: May I get one sample before placing order?
Re: Yes, Sample are available. For normal products, samples are for free and you just need to bear the freight; 

For those high value products, you just need to freight and certain product cost. When we both cooperate for 

some times or when you are our VIP customer, free sample will be offered when you need.

Q2: Which payment is available for your company?
Re: T/T, L/C. You can choose the one which is convenient for you. 

Q3: How and when can I get my goods after payment?
Re: For small quantity products, they will be delivered to you by international courier(DHL, FedEx, TNT etc.) 

or by air. Usually it will cost 3-5days that you can get the goods after delivery.For large quantity products,

shipping by see is worthwhile.It will cost days to weeks to come to your destination port, which depends on 

where the port is.

Q4: Is there any possible to use my appointed label or package?
Re: Yes. If needed, we'd like to use label or package according to your requirement. 

Q5: How can you guarantee the goods you offer is qualified? 
Re: We always believe honesty and responsibility are basis of one company, so whatever products we provide 

for you all are qualified. We will have goods tested and provide COA before delivery for sure.